China manufacturer Air-Compressor Electric Industry Oxygen Generator Screw Air Compressor with high quality

Product Description

Product Description

 

Belt driven air compressFeatures:
Air CoTechnical data:

Model Air delivery /Working pressure  Motor power  Cooling air volume Cooling water volume  connect pipe diam. Dimension(mm) Weight
m3/min/bar KW m3/min L/min Kg
KSTK-10SA 1.1/7 1.0/8 0.85/10 0.7/12.5 7.5 32.5 \ 3/4″ 850*640*880 350
KSTK-15SA 1.8/7 1.65/8 1.5/10 1.3/12.5 11 50 \ 1″ 1150*750*1180 450
KSTK-20SA 2.4/7 2.2/8 2.1/10 1.8/12.5 15 50 \ 1″ 1150*750*1180 460
KSTK-25SA 3.1/7 2.9/8 2.7/10 2.3/12.5 18.5 110 \ 1″ 1200*880*1450 620
KSTK-30SA/SW 3.8/7 3.6/8 3.2/10 2.5/12.5 22 110 14.5 1″ 1200*880*1450 640
KSTK-40SA/SW 5.3/7 5.0/8 4.3/10 3.6/12.5 30 145 20 1 1/4″ 1250*1000*1360 900
KSTK-50SA/SW 6.6/7 6.2/8 5.7/10 4.6/12.5 37 145 25 1 1/4″ 1350*1000*1640 1060
KSTK-60SA/SW 8.0/7 7.7/8 6.9/10 6.0/12.5 45 185 30 1 1/2″ 1300*1000*1470 1150
KSTK-75SA/SW 10.5/7 9.8/8 8.7/10 7.3/12.5 55 220 39.9 2″ 1950*1320*1570 1750
KSTK-100SA/SW 13.6/7 13.0/8 11.3/10 10.1/12.5 75 250 51 2″ 1950*1320*1570 1840
KSTK-120SA/SW 16.2/7 15.4/8 13.2/10 11.2/12.5 90 270 61 2″ 2100*1320*1700 2030
Remark: A means air cooling, W means water cooling 

Product Features

1.Automatic interlock control and operations management

Intelligent microcomputer controller, combined with pressure, temperature, current, signal, alarm with 12 important indicators and 13 comprehensive security protection measures with Chinese and English display optional and maintenance time limit remind. The RS485 communication interface can realize several machines joint control. Concise and comprehensive to keep the customer informed of the machines’ situation in time.

2.Safe and zero leakage connection

we have abandoned the traditional low cost hydraulic hose design. we use High-rigid pipes and flexible joint connection, avoiding bursts typically caused by ageing . Fluorine rubber type 0-ring offers a flexible seal preventing leakage.

3.heavy duty air filter with prefilter

A European imported air filter offers High efficiency and a low pressure drop.

4.CHINAMFG brand electrical components

5.American brand high efficiency transmission system

Functional Specification:
1. The system adopts the one-click start way,Air compressor,Refrigerated Air Dryer, Adsportion dryer,Generator will start to work following the program 1 by one.
2. The oxygen generator equipped with unqualified oxygen gas warning alarm and automatic vent out ,then it can make sure that all oxygen that goes into the pipeline is good quality.
3. The oxygen generator equipped with colorful touch screen from CHINAMFG Germany ,it can display the running condition , purity, pressure, and nitrogen rate of flow of whole system on-line;And it can also remind the maintenance time,record the trouble alarm, download the operating data.

Company Profile

HangZhou Poly Air Separation Equipment Manufacturing Co.,Ltd  is a professional manufacturer which produces PSA nitrogen making equipment, PSA oxygen making equipment, VPSA oxygen making equipment, compressed air purification equipment etc.

The company combined with the R&D, design manufacturing and marketing. qualify  with the perfect production conditions, equipment installation, configuration, maintenance and service. It also hire the expert in the field of new material  and engineering thermodynamics as technical consultant to ensure that our products and technical is always in the line of technology and provide a reliable and scientific guarantee of product design and manufacturing. Sinopoly air separation is becoming a technical leader in the line of compressed air purification and pressure swing adsorption.

Company’s products are mainly divided into:   PSA nitrogen(oxygen) equipment, VPSA analytical oxygen equipment, vacuum gas purification equipment, membrane separation nitrogen (oxygen) devices, CHINAMFG dryer, micro heat regenerative dryer, heatless regenerative dryer, heat regenerative dryer, filter and other 10 series of specifications. Products are widely used in petroleum, petrochemical, electric power, chemical industry, metallurgy industry, coal industry, pharmaceutical industry, aerospace, automotive industry, plastics industry, chemical fiber, rubber, glass industry, food industry, electronic industry and CHINAMFG and other fields.

Company is located in HangZhou Gaoqiao Industrial park, adjacent to HangZhou West lake, Fuchun river, Qiandao lake and other national places of interests.

Company tenet: good faith seeks for the development good quality seeks for the brand, good belief seeks for the service.

Our service tenet: customer satisfaction is the enterprise’s CHINAMFG pursuit!

HOT PRODUCTS

 

Packaging & Shipping

FAQ

Q: Are you trading company or factory?

A: We are OEM skid-mounted Oxygen Generator factory.Welcome you to visit our company at anytime!

Q: What is the terms of payment?

A: T/T, L/C etc.

Q: How long is your delivery time?

A: Generally it is 10-50 working days depending on your order.

Q: What’s the order process?

A: 1) Inquiry—provide us all clear requirements.
2) Quotation—official quotation form with all clear specifications.
3) Printing file— PDF, Ai, CDR, PSD, the picture resolution must be at least 300 dpi.
4) Contract confirmation—provide correct contract details.
5) Payment terms— T/T 30% in advanced, balanced before shipment.
6) Production—mass production g. Shipping,land transportation, air or courier. Detailed picture of package will be provided.
7) Installation and commissioning.

Cooling System: Air Cooling
Power Source: Diesel Engine
Type: Single Screw Compressor
Parts: Filters
Purpose: Gas Manufacturing
Specification: standard
Customization:
Available

|

air compressor

How Do You Troubleshoot Common Issues with Gas Air Compressors?

Troubleshooting common issues with gas air compressors involves identifying and addressing potential problems that may arise during operation. Here’s a detailed explanation of the troubleshooting process:

1. Start with Safety Precautions:

Prior to troubleshooting, ensure that the gas air compressor is turned off and disconnected from the power source. Follow proper safety procedures, such as wearing appropriate personal protective equipment (PPE), to avoid accidents or injuries.

2. Check Power Supply and Connections:

Verify that the compressor is receiving power and that all electrical connections are secure. Inspect the power cord, plug, and any switches or controls to ensure they are functioning properly. If the compressor is equipped with a battery, check its charge level and connections.

3. Check Fuel Supply:

For gas air compressors that use gasoline or propane, ensure that there is an adequate fuel supply. Check the fuel tank level and verify that the fuel shut-off valve is open. If the compressor has been sitting idle for an extended period, old or stale fuel may cause starting issues. Consider draining and replacing the fuel if necessary.

4. Inspect Air Filters:

Dirty or clogged air filters can restrict airflow and affect the compressor’s performance. Check the intake air filters and clean or replace them as needed. Clogged filters can be cleaned with compressed air or washed with mild detergent and water, depending on the type of filter.

5. Check Oil Level and Quality:

If the gas air compressor has an engine with an oil reservoir, verify the oil level using the dipstick or oil level indicator. Insufficient oil can lead to engine damage or poor performance. Additionally, check the oil quality to ensure it is clean and within the recommended viscosity range. If needed, change the oil following the manufacturer’s guidelines.

6. Inspect Spark Plug:

If the gas air compressor uses a spark plug ignition system, inspect the spark plug for signs of damage or fouling. Clean or replace the spark plug if necessary, following the manufacturer’s recommendations for gap setting and torque.

7. Check Belts and Pulleys:

Inspect the belts and pulleys that drive the compressor pump. Loose or worn belts can cause slippage and affect the compressor’s performance. Tighten or replace any damaged belts, and ensure that the pulleys are properly aligned.

8. Listen for Unusual Noises:

During operation, listen for any unusual or excessive noises, such as grinding, rattling, or squealing sounds. Unusual noises could indicate mechanical issues, loose components, or improper lubrication. If identified, consult the compressor’s manual or contact a qualified technician for further inspection and repair.

9. Consult the Owner’s Manual:

If troubleshooting steps do not resolve the issue, refer to the compressor’s owner’s manual for specific troubleshooting guidance. The manual may provide additional troubleshooting steps, diagnostic charts, or recommended maintenance procedures.

10. Seek Professional Assistance:

If the issue persists or if you are unsure about performing further troubleshooting steps, it is recommended to seek assistance from a qualified technician or contact the manufacturer’s customer support for guidance.

Remember to always prioritize safety and follow proper maintenance practices to prevent issues and ensure the reliable performance of the gas air compressor.

air compressor

What Is the Impact of Altitude on Gas Air Compressor Performance?

Altitude can have a significant impact on the performance of gas air compressors. Here’s a detailed explanation:

1. Decreased Air Density:

As altitude increases, the air density decreases. This reduction in air density affects the performance of gas air compressors, primarily because compressors rely on the intake of ambient air to generate compressed air. With lower air density at higher altitudes, the compressor’s ability to draw in a sufficient volume of air is reduced.

2. Reduced Compressor Output:

The decrease in air density directly affects the compressor’s output. Gas air compressors may experience a decrease in their maximum airflow and pressure capabilities at higher altitudes. This reduction in output can impact the compressor’s efficiency and its ability to deliver the required compressed air for various applications.

3. Increased Compressor Workload:

At higher altitudes, gas air compressors need to work harder to maintain the desired level of compressed air output. The reduced air density means the compressor must compress a larger volume of air to achieve the same pressure as it would at lower altitudes. This increased workload can lead to higher energy consumption, increased wear and tear on the compressor components, and potentially decreased overall performance and lifespan.

4. Engine Power Loss:

If the gas air compressor is powered by an internal combustion engine (such as gasoline or diesel), altitude can also impact the engine’s performance. As the air density decreases, the engine may experience a power loss due to reduced oxygen availability for combustion. This can result in reduced engine horsepower and torque, affecting the compressor’s ability to generate compressed air.

5. Considerations for Proper Sizing:

When selecting a gas air compressor for use at higher altitudes, it is crucial to consider the specific altitude conditions and adjust the compressor’s size and capacity accordingly. Choosing a compressor with a higher airflow and pressure rating than required at sea level can help compensate for the reduced performance at higher altitudes.

6. Maintenance and Adjustments:

Regular maintenance and adjustments are necessary to optimize the performance of gas air compressors operating at higher altitudes. This includes monitoring and adjusting the compressor’s intake systems, fuel-to-air ratio, and ignition timing to account for the reduced air density and maintain proper combustion efficiency.

In summary, altitude has a notable impact on the performance of gas air compressors. The decrease in air density at higher altitudes leads to reduced compressor output, increased compressor workload, potential engine power loss, and considerations for proper sizing and maintenance. Understanding these effects is crucial for selecting and operating gas air compressors effectively in various altitude conditions.

air compressor

What Is a Gas Air Compressor?

A gas air compressor is a type of air compressor that is powered by a gas engine instead of an electric motor. It uses a combustion engine, typically fueled by gasoline or diesel, to convert fuel energy into mechanical energy, which is then used to compress air. Here’s a detailed explanation of a gas air compressor:

1. Power Source:

A gas air compressor utilizes a gas engine as its power source. The engine can be fueled by gasoline, diesel, or other types of combustible gases, such as natural gas or propane. The combustion engine drives the compressor pump to draw in air and compress it to a higher pressure.

2. Portable and Versatile:

Gas air compressors are often designed to be portable and versatile. The gas engine provides mobility, allowing the compressor to be easily transported and used in different locations, including remote job sites or areas without access to electricity. This makes gas air compressors suitable for applications such as construction projects, outdoor activities, and mobile service operations.

3. Compressor Pump:

The compressor pump in a gas air compressor is responsible for drawing in air and compressing it. The pump can be of various types, including reciprocating, rotary screw, or centrifugal, depending on the specific design of the gas air compressor. The pump’s role is to increase the pressure of the incoming air, resulting in compressed air that can be used for various applications.

4. Pressure Regulation:

Gas air compressors typically feature pressure regulation mechanisms to control the output pressure of the compressed air. This allows users to adjust the pressure according to the requirements of the specific application. The pressure regulation system may include pressure gauges, regulators, and safety valves to ensure safe and reliable operation.

5. Applications:

Gas air compressors find applications in a wide range of industries and activities. They are commonly used in construction sites for powering pneumatic tools such as jackhammers, nail guns, and impact wrenches. Gas air compressors are also utilized in agriculture for operating air-powered machinery like sprayers and pneumatic seeders. Additionally, they are employed in recreational activities such as inflating tires, sports equipment, or inflatable structures.

6. Maintenance and Fuel Considerations:

Gas air compressors require regular maintenance, including engine servicing, oil changes, and filter replacements, to ensure optimal performance and longevity. The type of fuel used in the gas engine also needs to be considered. Gasoline-powered compressors are commonly used in smaller applications, while diesel-powered compressors are preferred for heavy-duty and continuous operation due to their higher fuel efficiency and durability.

Overall, a gas air compressor is an air compressor that is powered by a gas engine, offering mobility and versatility. It provides compressed air for various applications and is commonly used in construction, agriculture, and outdoor activities. Regular maintenance and fuel considerations are essential to ensure reliable operation and optimal performance.

China manufacturer Air-Compressor Electric Industry Oxygen Generator Screw Air Compressor   with high qualityChina manufacturer Air-Compressor Electric Industry Oxygen Generator Screw Air Compressor   with high quality
editor by CX 2023-10-17

Recent Posts